Microsemi SyncServer S600, User Manual

Page: 163 / 252

098-00720-000 Revision B – April, 2016 SyncServer 600 Series User’s Guide 161
Chapter 6 Provisioning
Provisioning for SNMP
Each container contains the following sub-info in its own OID:

Alarm/Event ID

Date&Time

Severity

Alarm/Event Description

Index

Alarm Action

Sequence Number
The alarm OIDs are under 1.3.6.1.4.1.9070.1.2.5.7.4.1.
The Alarm/Event ID element should be used to determine which alarm or event was
generated. Alarm and Event IDs are listed in
Appendix A, System Messages .
Adding or Deleting a Manager IP Address
Use the “set snmp add manager” command to add a manager IP address. Use the
“set snmp delete manager” command to delete a manager IP address. The
SyncServer S6x0 will support a maximum of 10 manager IP addresses.
Provisioning to Generate v2 Traps
Use the
set snmp trapversion
command to provision the trap version to v2.
By default, the SyncServer S6x0 will generate v2 traps.
Note: The SNMP MIB can be downloaded from the SyncServer S6x0
on the Help web page. The LAST-UPDATED and REVISION fields in
the MIB can be used to determine the revision of the MIB. The
S650ALARM MIB description will also list which firmware the MIB
was made for. Older versions of the S650ALARM MIB will be
compatible with newer versions of firmware, but will not support
newer features.