Microsemi SyncServer S600, User Manual

Page: 210 / 252

210 SyncServer 600 Series User’s Guide 098-00720-000 Revision B – April, 2016
Appendix B Specifications and Factory Defaults
GNSS Antenna Kits Specifications
GPS Antenna Coaxial Cable Specifications
Other cable types are available. Table B-21 provides antenna cable specifications.
Before using additional cables, verify that the total antenna system gain is
acceptable.
Port-to-port isolation L1 +/-40
MHz 50 dB typical
DC power +4.5 to +13 V DC
Damage threshold 18 V DC either polarity
Operating current 23 to 48 mA depending on voltage
Pass through current 450 mA
Group delay 40 ns typical
RF connectors Female N-type
Table B-21. Antenna Cable Specifications
Cable Type
Loss
(@1.575 GHz dB
per foot)
DC Resistance
(

per foot)
Type Center
Conductor
Flammability
RG213/U
(Belden 8267) 0.093 dB 0.0030 Stranded 13 AWG U/L CSA
RG213/U
(Belden 8267) 0.093 dB 0.0030
Stranded 2.62 mm
2
U/L CSA
UHF/VHF
(Belden 9913) 0.058 dB 0.0027 Solid 10 AWG
UHF/VHF
(Belden 9913) 0.058 dB 0.0027
5.26 mm
2
UHF/VHF
(Belden 89913) 0.089 dB 0.0027 Solid 10 AWG Plenum U/L
CSA
UHF/VHF
(Belden 89913) 0.089 dB 0.0027
5.26 mm
2
Plenum U/L
CSA
LMR-400 0.051 dB Shield – 0.00165
Center – 0.00139 0.109 inch Solid
LMR-400 0.051 dB Shield – 0.00165
Center – 0.00139
0.27686 cm
2
Solid
Table B-20. GPS L1 1:4 Active Splitter Specifications (Continued)
Characteristic Specification