Microsemi SyncServer S600, User Manual

Page: 217 / 252

098-00720-000 Revision B – April, 2016 SyncServer 600 Series User’s Guide 217
Appendix B Specifications and Factory Defaults
Factory Defaults
Table B-32. Admin > Alarms Parameters
Description Default Value Value Range
Name N/A Cannot be set by user.
See
Table A-1
for name of each
alarm
State Strictly condition
driven

Green = condition not set or
has been acknowledged

Blue = condition set at Notify
severity (and has not been
user cleared or
acknowledged)

Orange = condition set at
Minor severity (and has not
been user cleared or
acknowledged)

Red = condition set at Major
severity (and has not been
user cleared or
acknowledged)

Gray = this is a transient
alarm
Clear Now not checked
(all rows)
not checked | checked
Auto ACK (s) 0 (all rows) 0, 1, ..., 999, 1000
Severity
See
Table A-1
for default
severity for each
alarm
Notify | Minor | Major
Reporting Delay (s) 0 (all rows) 0, 1, ..., 999, 1000
Send Trap checked
(all rows)
not checked | checked
Write Log checked
(all rows)
not checked | checked
Send Email not checked
(all rows)
not checked | checked