Microscan MS-850, User Manual

Page: 71 / 144

MS-850 Raster Scanner User’s Manual
3-3
3–Ser
ial
Conf
ig.
Function cmd Command Title Format
Code Type
K! Code 93 < K! status,fixed length,length>
KZ AIAG < KZ >
Kx Background Color < Kx background color
KW?
Code Type Status
Request
< KW ? >
Output
Kk Noread Message < Kk status,output >
KC Laser On/Off < KC status,UNUSED1,UNUSED2 >
KS Serial Verification
< KS serial command status,serial command
beep status,control/hex outpu t>
Ku Beeper < Ku status,volume >
Kv Output-1
< Kv output on,polarity,pulse width,# before
output >
Kw Output-2
< Kw output on,polarity,pulse width,# before
output >
K‘ Output-3
< K‘ output on,polarity,pulse width,# before
output >
Kl Bar Code Output < Kl status,when to output >
KY Partial Output < KY status,start position,length >
K/
Operational Command
Output Format
< K/ status >
KX?
Scanner Output Status
Request
< KX ? >
Setup
KE Scans per Second < KE speed >
KD Analog Gain Adjust. < KD gain adjustment,AGC sampling >
KP Scanner Type < KP density >
KH Transition Counter < KH status,minimum transitions>
KN No Barcode Output < KN status,message >
K’ Bad Barcode Output < K’ status,message>
KU?
Scanner Setup Status
Request
< KU ?>
Raster Con-
trols
KR Raster Setup
< KR status,top offset,bottom offset,sweep
rate,follow motor status >
Diagnostics
K” Warning Message Status <K" status1,laserhi,laserlo,novram corrupt>
K; Laser Overcurrent <K; message>
K: Laser Undercurrent <K: message>
K+ Over-temperature <K+ deg,message>
K- Under-temperature <K- deg,message>
K$ Lifetime Hours <K$ hours10,message>
K%?
Present Operating Tem-
perature
<K% deg> (read only)
K_? Counts <K_ powerups,resets> (read only)
K@? Time Since Last Reset <K@ hours,minutes> (read only)
Status K? All Status Request < K? >