Depending on your selection, you can select
all available points of interest on the digital
map or the points of interest in the vicinity of
the selected position.
X
Proceed as described in "Searching for a
phone book entry" (
Y
page 394).
If COMAND can assign the characters
entered to one entry unambiguously, the
address entry appears automatically.
X
To start route calculation: select
Start
and press
W
to confirm.
ZAGAT
®
survey service
The Z icon before a search result shows that a
ZAGAT
®
rating is available for this entry.
:
ZAGAT ratings
;
To display details
X
Select an entry with the "Z" icon by turning
cVd
the COMAND controller and press
W
to confirm.
The ZAGAT evaluations appear.
ZAGAT example description
X
To show the information: select
Details
and press
W
to confirm.
Selecting a POI using the map
Point of interest on the map
You can select points of interest that are
available in the selected (visible) section of
the map. The POI is highlighted on the map,
you will see further information on the upper
edge of the display.
X
To switch to navigation mode: press the
Ø
button.
X
To show the menu: press
W
the COMAND
controller.
X
Select
Guide
in the navigation system
menu bar by turning
cVd
the COMAND
controller and press
W
to confirm.
If points of interest are available:
Depending on the map scale selected,
point of interest icons appear on the map.
The scale at which the icons are displayed
on the map varies according to the icon.
340
Navigation
CO
MAND
