Switching the COMAND display on/off
X
Press the
W
button.
or
X
Select
System
in the main function bar by
sliding
ZV
and turning
cVd
the COMAND
controller and press
W
to confirm.
In both cases, the system menu appears.
X
To switch off: select
Display Off
and
press
W
to confirm.
X
To switch on: press one of the buttons,
e.g.
W
,
Ø
or the
%
back button.
Cleaning instructions
!
Do not touch the display. The display has
a very sensitive high-gloss surface; there is
a risk of scratching. If you have to clean the
screen, however, use a mild cleaning agent
and a soft, lint-free cloth.
The display must be switched off and have
cooled down before you start cleaning. Clean
the display screen, when necessary, with a
commercially available microfiber cloth and
cleaning agent for TFT/LCD displays. Do not
apply pressure to the display surface when
cleaning it, as this could cause irreversible
damage. Then, dry the surface with a dry
microfiber cloth.
Avoid using alcoholic thinners, gasoline or
abrasive cleaning agents. These could dam-
age the display surface.
292
At a glance
COMAND
