Mercedes-Benz COMAND, Operating Instructions Manual

Page: 88 / 298

Starting route calculation
The entered destination appears in the address entry menu.
X
To confirm Start Start or Continue Continue : press the controller.
If you select Start Start : the route is calculated with the current route settings (
Y
page 80). While
route calculation is in progress, an arrow will indicate the direction to your destination. Once
the route has been calculated, route guidance begins. If the vehicle is traveling on a non-
digitized road, the system displays the linear distance to the destination, the direction to the
destination and the Road Not Mapped Road Not Mapped message.
If you select Continue Continue : alternative routes are calculated. You can display these and select
them for route guidance (
Y
page 110).
If route guidance has already been activated, a prompt will appear asking whether you wish
to end the current route guidance.
X
To select Yes Yes or Set as Intermediate Destination Set as Intermediate Destination : turn and press the controller.
Yes Yes cancels the current route guidance and starts route calculation to the new destination.
Set as Intermediate Destination Set as Intermediate Destination adds the newly entered intermediate destination in
addition to the existing destination. The intermediate destinations menu appears
(
Y
page 94).
i
The route is calculated using digital map data. The calculation time depends on the dis-
tance from the destination, for example.
The calculated route may differ from the ideal route, e.g. due to road works or incomplete
map data. Please also refer to the notes about the digital map (
Y
page 130).
Calling up the keyword search
X
To select the magnifying glass symbol: while in the address entry menu, slide 6 , turn and
then press the controller.
Viewing the vicinity of the destination
X
To select symbol : : turn the controller and press to confirm.
You can explore the destination area.
86
Destination input
Navigation