Mercedes-Benz COMAND Operating Instructions Manual Download Page 273

Page: 273 / 298

the remote control and press the

button

to confirm.

You will see a menu with the available vehi-

cle functions.

Select

Vehicle Settings

Seat Set‐

tings

using the

buttons.

Press the

button on the remote control.

Further information on seat settings

(

page 63).

Further information on panel heating

(

page 59).

The panel heating in the rear compart-

ment is available if the key in the ignition

lock is in position 1 or 2.

Navigation mode

Navigation functions such as the compass

can be used in the rear compartment.
Calling up Drive Information

Press the

button on the remote

control.

You will see the current navigation infor-

mation.

Calling up the compass

Press the

button on the remote

control.

Press the

button on the remote

control.

A menu appears.

Using the remote control, select

Compass

Calling up the online map display

An Internet connection is required to use

the online map display (

page 173).

Press the

button on the remote

control.

Press the

button on the remote

control.

A menu appears.

Using the remote control, select

Online

Map Display

Online and Internet functions

You can use online and Internet functions in

the rear compartment.
You can choose from the following Internet

functions:

Weather

Internet

Mercedes-Benz Apps

Internet radio

Mercedes-Benz Mobile Website

Using Internet functions:

Press button

on the remote control.

A menu appears.

Select the online/Internet function

required.

Calling up the Internet functions menu:

Press the

button on the remote

control while using the Internet function.

Exiting the Internet functions:

Press the

button on the remote

control.

A menu appears.

Select the

symbol in the menu and

press the

button on the remote control

to confirm.

Select another function (e.g. Media or

Radio).

Online and Internet functions

271

Rea

rSe

tertai

nme

Sys

tem

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands