Mercedes-Benz COMAND Operating Instructions Manual Download Page 74

Page: 74 / 298

Child-proof locks

Switching the rear compartment dis-

plays on/off

This function serves to switch the rear-com-

partment displays on/off.

Press the

button.

The vehicle menu is displayed.

To select

Parental Control

: turn and

press the controller.

The menu to select the side in the rear

compartment is activated.

Select

Rear Left

Rear Right

To switch

Display

on/off: turn the con-

troller.

Exiting the vehicle settings:

To select

: slide

V¬

and press the

controller.

Locking/unlocking rear compart-

ment displays

This function serves to lock/unlock the rear-

compartment displays.

Press the

button.

The vehicle menu is displayed.

To select

Parental Control

: turn and

press the controller.

The menu to select the side in the rear

compartment is activated.

Select

Rear Left

Rear Right

To select

Lock

to lock/unlock the rear

compartment displays: slide

and press

the controller.

The display is locked, a corresponding mes-

sage with

appears on the screen.

Unlock

appears in the display.

Exiting the vehicle settings:

To select

: slide

V¬

and press the

controller.

The volume can still be adjusted if you

have locked the rear compartment display.

It can also be switched on/off using the

integrated switch.

360° camera

Important notes

The 360° camera is only an aid. It is not a

replacement for your attention to your imme-

diate surroundings. You are always responsi-

ble for safe maneuvering and parking. Make

sure that no persons or animals are in the

maneuvering range.

Overview

The 360° camera surveys the vehicle sur-

roundings and assists you, for example when

parking or at exits with reduced visibility.
For further information on the 360° camera,

see the separate vehicle Operator's Manual.

Settings for the 360° camera

When you activate the

Activation by R

gear

function, the image from the 360° cam-

era is displayed when you select reverse gear.
Activating/deactivating using the reverse

gear:

Press the

button in the center con-

sole.

The vehicle menu is displayed.

360° camera

Veh

icle

ncti

ons

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands