Mercedes-Benz COMAND Operating Instructions Manual Download Page 71

Page: 71 / 298

Activating the cooling with air dehumidi-

fication facilitates the cooling of the vehicle

interior even with high outside tempera-

tures.

Call up the climate control menu

(

page 68).

To switch to the footer: slide

the con-

troller.

To select

A/C

: turn and press the controller.

Switch cooling with air dehumidification on

or off

The current status of the cooling function

is displayed in the climate control bar: A/C

ON – activated, A/C OFF – deactivated

(

page 67).

Deactivating the cooling with air dehu-

midification function reduces fuel con-

sumption.

Synchronizing the climate control set-

tings

This setting is made in the bottom bar of the

climate control menu.
With the

Sync

(synchronization) option,

you can decide whether you wish to activate

the climate control settings for all zones

together or separately.

Call up the climate control menu

(

page 68).

To switch to the footer: slide

the con-

troller.

To select

Sync

: turn and press the con-

troller.

Switch the synchronization function on

or off

With the synchronization function switched

off, you can alternate between driver and

front passenger.

To switch from the footer to the main area:

slide

the controller.

To switch between left and right: slide

the controller.

Not all climate control functions allow

switching between the driver and front

passenger.

Further information (see the vehicle Opera-

tor's Manual).

Rear-compartment air conditioning set-

tings

This setting is made in the bottom bar of the

climate control menu.
You can also set the rear-compartment air

conditioning from the front.

Call up the climate control menu

(

page 68).

To switch to the footer: slide

V¬

the con-

troller.

To select

Rear Setting

: turn and press

the controller.

Activate the rear-compartment climate

control settings. The vehicle interior dis-

play changes accordingly.

To switch the setting back to the front

again: select

Return to Front

After a short time, COMAND automatically

switches the adjustment functions back to

the front.

Climate control settings

Vehi

fun

cti

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands