Mercedes-Benz COMAND Operating Instructions Manual Download Page 48

Page: 48 / 298

A clock is shown in the additional area.

Time settings

General information

COMAND can automatically set the time and

date.
The following navigation system functions

require the time, time zone and summer/

standard time to be set correctly in order to

work properly:

route guidance on routes with time-

dependent traffic guidance

calculation of expected time of arrival

Switching automatic time on and off

The

Automatic Time Settings

function is

used to activate or deactivate the automatic

setting of the time and date. This function is

activated when the vehicle leaves the factory.

Press the

button.

The vehicle menu is displayed.

To select

Time

: slide

, turn and press

the controller to confirm.

A menu appears.

To select

Automatic Time Settings

press the controller.

To switch the function on

or off

press the controller.

Setting the time zone

To set the time zone, the

Automatic Time

Settings

function must be activated

(

page 46).

Press the

button.

The vehicle menu is displayed.

To select

Time

: slide

, turn and press

the controller.

A menu appears.

To select

Time Zone:

: turn and press the

controller.

A list of countries appears. The

dot indi-

cates the current setting.

Select the country you are currently in by

turning and pressing the controller.

The country is accepted.
A time zone list may also be displayed,

depending on the country selected.

To select the desired time zone: turn and

press the controller.

The time zone is accepted.
A list of available options for setting

summer time appears (

page 46).

Setting summer and standard time

You can use the

Daylight Savings Time

(Summer)

menu to set automatic summer

time changeover or switch the summer time

setting on or off. The changeover to summer

time advances the time by one hour.
The

Daylight Savings Time (Summer)

menu or the

Automatic

option is not availa-

ble in all countries.

Press the

button.

The vehicle menu is displayed.

To select

Time

: slide

the controller,

turn and press to confirm.

A menu appears.

To select

Daylight Savings Time

(Summer)

: turn and press the controller.

A list of available options for setting

summer time appears.

To select

Auto

Off

: turn and press

the controller.

Time settings

Sys

tem

ttin

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands