Mercedes-Benz COMAND Operating Instructions Manual Download Page 258

Page: 258 / 298

To set the desired

Balance/Fader

setting:

turn the controller.

Rotary menu and the image show the sound

focus set.

To return to the menu: slide

the con-

troller.

To return to the basic menu: press the

button briefly.

Changing loudspeaker source

Select

Select Sound

Sound Source

Source

specifies which seat-

based media source shall be output on the

speaker system.
Example: a media source is being listened to

using headphones in the

Rear Right

Rear

Right

must be selected in

Select Sound

Source

if the same media source is to be lis-

tened to using the sound system.

To display the menu bars: slide

the

controller in media mode.

To select

Sound

in the menu bar: turn and

press the controller.

The menu with the last accessed setting

appears.

Turn the controller until

Select Sound

Source

is in the center.

Slide

the controller.

Rotary menus for the speaker source are

activated.

To set the desired speaker source: turn the

controller.

The segment, text and image show the

selected setting.

To return to the menu: slide

the con-

troller.

To return to the basic menu: press the

button briefly.

VIP & BAL selection

The

VIP & BAL Selection

setting can be

used to select sound optimization for a spe-

cific seat, e.g.

Rear Left

To display the menu bars: slide

the

controller in media mode.

To select

Sound

in the menu bar: turn and

press the controller.

The menu with the last accessed setting

appears.

Turn the controller until

VIP & BAL

Selection

is in the center.

To activate the left-hand rotary menu to

switch

VIP & BAL Selection

on and off:

slide

the controller.

To activate

VIP & BAL Selection

: turn

the controller until

is active.

To activate the right-hand rotary menu:

slide

the controller.

To set the desired

VIP

VIP && BAL

BAL Selection

Selection

turn the controller.

The segment, text and image show the

selected setting, e.g. for

Rear Left

To return to the menu: slide

the con-

troller.

To return to the basic menu: press the

button briefly.

256

Burmester

high-end 3D surround sound system

Sound

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands