Mercedes-Benz COMAND Operating Instructions Manual Download Page 73

Page: 73 / 298

Switching the ionization on/off

This setting is made in the main area of the

climate control menu.
The ionization has a cleansing effect on the air

in the vehicle interior. Further information

(see the vehicle Operator's Manual).

Call up the climate control menu

(

page 68).

To select

Ionization

: turn and press the

controller.

The setting element is active.

To switch the ionization on/off: press the

controller.

Exiting a menu

Press the

button.

Auxiliary heating

This setting is made in the main area of the

climate control menu.
You can pre-set three departure times for

automatic activation of the auxiliary heating.

Selecting the pre-set time:

Call up the climate control menu

(

page 68).

To select

Auxiliary Heating

: turn and

press the controller.

Turn the controller.

Changing the pre-set time:

Call up the climate control menu

(

page 68).

To select

Auxiliary Heating

: turn and

press the controller.

To select the departure time that will be

changed: turn and press the controller.

A menu for changing the time opens.

To select the required setting element (ana-

log clock, hours or minutes): slide

and

the controller.

To change the setting: turn the controller.

To exit the menu: press the controller.

Climate control settings

Vehicle

functions

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands