Mercedes-Benz COMAND Operating Instructions Manual Download Page 237

Page: 237 / 298

Media Interface basic display

Additional display area with cover view

;

Artist and album

Main function bar

Display for the active data medium

Media menu bar

Title display in the media list

Current track/number in track list

Numerical time display

Graphic time display

Switching to Media Interface

Switching on automatically

Connect a data medium to USB port 1 or

USB port 2.

Make sure that the Media Interface 1 or

Media Interface 2 basic menu is activated.

If playable media files are found, they will

be played by COMAND.
If you remove a device, the

No Device

Connected

message appears.

Further options for switching on

Using the number keypad: (

page 211)

Using the main function bar: (

page 211)

Using the device list: (

page 211)

Using the

button: (

page 210)

Supported devices

The following data media can be connected to

COMAND via the Media Interface:

iPod

iPhone

iPad

MP3

USB devices

It is not possible to run two Apple

devi-

ces simultaneously. Therefore the device

last connected is loaded.

iPod

, iPhone

and iPad

are registered

trademarks of Apple Inc., Cupertino, Cali-

fornia, USA.

Audio files, photos and video files can be

played back.

Operation with the Media Interface

235

Media

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands