Mercedes-Benz COMAND Operating Instructions Manual Download Page 240

Page: 240 / 298

To connect an external audio source to the

audio AUX, you will require an audio AUX

cable.

You will find further information online at

http://www.mbusa-mobile.com. Or call

the Mercedes-Benz Customer Assistance

Center at 1-800-FOR-MERCedes

(1-800-367-6372) (for the USA) or Cus-

tomer Relations at 1-800-387-0100 (for

Canada).

Switching to audio AUX mode

Connect an external audio source.
The socket for the audio AUX jack is located

in the stowage compartment in the center

console.

The audio AUX is not selected automati-

cally.

Press the

button.

The menu for the last accessed media

source appears.

To select

Media

from the main function bar:

turn and press the controller.

You will see the menu.

Select

Aux

The audio AUX menu appears. The medium

is played if the audio source is switched on

and playback is activated.

Please see the respective operating instruc-

tions for how to operate the external audio

source.

Setting the audio AUX options

To select

Options

in the menu bar: slide

V¬

and press the controller.

A menu appears. You can set

Mono/Stereo

and

Volume

Mono/stereo:

To select

Mono/Stereo

: turn and press the

controller.

A menu appears.

Select

Mono

Stereo

The

dot indicates the current setting.

Volume:

To select

Volume

: turn and press the con-

troller.

Select

Standard

Boost

Standard

: the volume of the external audio

source is adjusted to a standard value.

Boost

: the volume of the external audio

source is raised by approximately 10 dB.
The

dot indicates the current setting.

Traffic announcement:
A device which is connected as an external

audio source may seem quieter or louder in

the vehicle, or the usual maximum volume

cannot be achieved. On some devices, it is

possible to adjust the volume separately. In

this case, start at a medium volume and

increase it gradually. This enables you to

determine whether the system is able to play

the music at high volume without distorting it.

238

Audio AUX mode

Media

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands