Mercedes-Benz COMAND Operating Instructions Manual Download Page 234

Page: 234 / 298

To stop

or start

playback

Name of the connected Bluetooth

audio

device (example)

Options menu

Some mobile phones only support two Blue-

tooth

profiles at the same time (e.g. Hands-

Free Profile for Bluetooth

telephony and

Bluetooth

audio profile for audio streaming).

If you activate Bluetooth

audio mode and

there is already an active Internet connection,

this can cause the connection to be termi-

nated.

Switching to Bluetooth

Audio

Press the

button.

To select

Bluetooth Audio

in the menu:

turn and press the controller.

COMAND activates the Bluetooth

audio

device. The basic display then appears.

Playback starts.

If the Bluetooth

audio device connected

supports metadata and corresponding data

is available, then the artist, track and album

name can be displayed.

Starting/stopping playback

To select Start playback

: turn and

press the controller.

Playback starts.

is selected.

To stop playback: select

A message appears.

is selected.

To continue playback: select

A message appears.

is selected.

Starting playback if the Bluetooth

audio device has been stopped

During the search for mobile phones, the con-

nection with the Bluetooth

audio device is

terminated (

page 139). In the Bluetooth

audio basic display (

page 232) you will see

the

No Bluetooth Audio Device Con‐

nected

message and the

Connect Last

Used

Used Player

Player

menu item cannot be selected.

When the search is finished, the Bluetooth

audio device can be reconnected.

To select Start playback:

: slide

V¬

and press the controller.

Playback resumes from the beginning.

To select

Connect Last Used Player

press the controller.

Depending on the Bluetooth

audio device

used, playback starts immediately or you

must start playback manually.
In this case, you will see the

Bluetooth

Audio Device Paused

message.

If there is an Internet connection and the

mobile phone that is connected only sup-

ports two Bluetooth

profiles at the same

232

Bluetooth

audio mode

Media

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands