Mercedes-Benz COMAND Operating Instructions Manual Download Page 232

Page: 232 / 298

Option 2: Secure Simple Pairing

The Bluetooth

audio device must sup-

port Bluetooth

version 2.1 for connection

via Secure Simple Pairing. COMAND cre-

ates a six-digit code, which is displayed on

both devices that are to be connected
For some Bluetooth

audio devices, the

pairing must be confirmed within 10 sec-

onds.

If the number code displayed on COMAND

and on the Bluetooth

audio device is the

same, select

Yes

: press the controller.

If you select

Yes

, authorization continues

and the Bluetooth

audio device is con-

nected. Playback starts.
If you select

, authorization is canceled.

External authorization

If COMAND does not find your Bluetooth

audio device, this may be due to particular

security settings on your Bluetooth

audio

device. In this case, check whether your Blue-

tooth

audio device can locate COMAND.

The Bluetooth

device name for COMAND is

MB Bluetooth

Switch on Bluetooth

audio mode

(

page 232).

To select

Options

: slide

V¬

and press

the controller.

To select

Bluetooth Audio Devices

press the controller.

To select

Connect via Audio Device

turn and press the controller.

Authorizing

Start the authorization on the Bluetooth

audio device; see the operating instruc-

tions of the Bluetooth

audio device.

After successful authorization, the Blue-

tooth

audio device is connected and

starts playing.

With some Bluetooth

audio devices, play-

back must first be started on the device itself

so that COMAND can play the audio files.

Reconnecting a Bluetooth

audio

device

The Bluetooth

audio profiles are connected

automatically under the following circum-

stances:

one of the last two mobile phones to have

been connected has also been used as a

Bluetooth

audio player (if this function is

supported by the mobile phone).

the mobile phone is automatically con-

nected. The Bluetooth

audio player is then

connected.

For an automatic connection with

COMAND, the telephone must be within

range.
For most Bluetooth

audio devices, the

"automatic connection" must be activated

by checking a box. Depending on the

device used, this prompt often takes place

when authorizing (see the Bluetooth

audio

device operating instructions).

If the

No Bluetooth Audio Device Con‐

nected

message appears, you have two

options to reconnect the Bluetooth

audio

device.
Option 1:

Connect Device

in the basic display:

press the controller.

If COMAND can locate the Bluetooth

audio device, it will be connected and will

start playing.

230

Bluetooth

audio mode

Media

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands