Mercedes-Benz COMAND Operating Instructions Manual Download Page 247

Page: 247 / 298

Using the DVD functions

In full-screen mode, press the controller

The DVD functions menu is shown.
It is possible to navigate in the DVD's

control menu when the arrows in the upper

menu bar are activated.

To select the

XZ¬Y

arrow to navigate in the

menu: turn the controller.

The active arrow is highlighted.

To select a menu entry: press the control-

ler.

The next menu entry in the direction of the

arrow is highlighted.

To call up a highlighted menu entry: turn the

controller until

is highlighted.

Press the controller.

The selected DVD scene is played.

To hide DVD functions: select

using the

controller.

Press the controller.

The DVD functions are hidden.

If there are functions such as Display cam-

era perspectives on the DVD, these are

shown in the DVD functions menu.

To call up Display camera perspectives:

turn and press the controller

Stop function

Show the DVD functions (

page 244).

Interrupting playback

To select

from the DVD functions

menu: turn and press the controller.

The

display changes to

. The

video image is hidden.

To continue playback: select

Playback continues from the point where it

was interrupted.

To stop playback: select

again while

playback is interrupted.

To start playback again: select

Playback restarts from the beginning.

Pause function

Show the DVD functions (

page 244).

Pausing playback
To select

: turn and press the control-

ler.

The

display changes to

To continue playback: select

Selecting a scene/chapter

If the film is divided into scenes or chapters,

these can be selected directly while the film is

running, or skipped forwards step by step.

This is not possible at certain points for some

DVDs (e.g. during the opening credits).
It may also be possible to select the scene/

chapter from the functions stored on the

DVD.

To skip forwards or back: in the video

menu, turn the controller.

The next or previous scene in the film is

skipped to.

The DVD functions can also be used to

make selections (

page 244).

Video DVD mode

245

Media

Summary of Contents for COMAND











































































































































































































































































































Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands

Mercedes-Benz COMAND, Operating Instructions Manual

Search results

Summary of Contents for COMAND

Reviews:

Related manuals for COMAND

Brands by name

Popular brands