EXTender
TM
7000 Installation Guide
Page 80
5.
Auto Offhook: Match to PBX Settings
Figure 5-31: Key Mapping
Default Local Dialing Setup
MI Path
Config-> Port->Default->Local Dialing
Note: These “Default” Local Dialing settings will set all ports identically.
1.
Trunk Access Code: Code used to dial out from the EXT 7000.
2.
Local Access Code: Code to access local trunks.
3.
Restriction Prefix: Used to set restricted access numbers.
4.
Collector Timeout: 5 (seconds). Used in conjunction with the Trunk Access Code.
5.
Local Dialing Key: Enabled
6.
Ring Timeout: 30
7.
Ring: Enabled
Figure 5-32: Local Dialing
MI Path
Config-> Ports->Ports X-X ->Port X ->More->Local Dialing
Note: These are individual port settings.
8.
Trunk Access Code: Code used to dial out from the EXT 7000.
9.
PBX Extension: The 4-digit extension that corresponds to this port.
10. Restriction Prefix: Used to set restricted access numbers.
11. Collector Timeout: 5 (seconds). Used in conjunction with the Trunk Access Code.
12. Ring Timeout: Timeout (seconds) for local dialing ring.
13. Local Dialing Prefix: This only needs to be configured if it will be used to route a call from a PRI channel
to an analog line, such as ADTRAN 550. It will automatically get prefixed with the dialing digits entered
by the user.
