EXTender
TM
7000 Installation Guide
Page 64
3.
Access the
Local Dialing
Menu.
MI Path:
Configuration->Port->Default->More->Local Dialing
4.
Set the Dial String
Collector Timeout
parameter correctly. After this time-out period has expired, the
keys pressed by the remote user will be captured and used to facilitate Voice Hairpinning. We recom-
mend a value of 5 seconds.
Figure 4-17: Collector Timeout(s)
Notes:
The
Trunk Access Code
and
Local Access Code
parameters are required for Voice Hairpinning in
this 2 to 1 configuration.
If a remote user reports that it takes too long to make a local call, you may have to reduce the
Collector
Timeout
parameter and the corresponding PBX setting.
5.
Use the arrow
keys (
→
,
↓
) to access the default Key Mapping menu shown below:
MI Path
Configuration->Port->Default->Key_Mapping
6.
Use the arrow
keys (
→
,
↓
) to access the
Line Appearance Keys
parameter. Set this parameter to
identify the function keys on the remote telephone which indicates the line is active. The remote user
answers a call by pressing a Line Appearance Key.
7.
Set the
Speaker Key
parameter.
8.
Make sure the
Auto Offhook
parameter matches the setting in the PBX.
Figure 4-18: Key Mapping
9.
Use the arrow
keys to return to the
Save
option.
10. Press
Enter
to save changes to the active config (.
rem
) file.You have completed configuring the first
EXTender 7000 to be used in a 2 to 1 Configuration.
Repeat the steps to configure the second EXTender 7000 unit. Remember that the second remote unit must
