EXTender
TM
7000 Installation Guide
Page 79
Setting Local Dialing Parameters
MI Path
Configuration -> Services -> Local Trunk
Note: “X” refers to the Ports used to transport calls across the T1 link.
1.
T1/PRI Port: T1/PRI Port 2
MI Path
Configuration -> WAN -> T1/PRI_Port (WAN3)-> T1/PRI_Port_1->Channel Setup->
DS0_X-X
Note: “X” refers to the Ports used to transport calls across the T1 link.
2.
Enabled: <Default>
3.
Direction: <Default>
4.
Services: [ N/A ]
5.
Connect Type: EXT_RAW_PCM1
Figure 5-30: DSO Setup
Key Mapping
MI Path
Config->Port->Default->More->Key Mapping
Note: These “Default” Key Mapping settings will set all ports identically.
1.
911 Analog Key: Used to access single analog port.
2.
Local Dialing Key: Used to access the local dialing trunk.
3.
Line Appearance Keys: Identifies which function keys will indicate the line is active.
4.
Speaker Key: Enabled.
