EXTender
TM
7000 Installation Guide
Page 53
MI Path
Configuration->Services->Add/Drop
The following menu appears:
Figure 4-2: Enabling Add/Drop
2.
Set
Add/Drop WAN1
to
T1/PRI_Port
1.
Add/Drop Configuration for T1 Leased
First the T1/PRI Port parameters must be configured, then the Add/Drop channels.
Add/Drop - T1/PRI Port (WAN3) - Leased T1 Parameters
This section provides instruction for the configuration of the Leased TI line that is connecting the EXTender
7000 to the Gateway.
1.
Set the
Clock Source
parameter to
T1PRI_Port1
.
•
Set to Port 1 if the network is providing timing, or Port 2 to use the EXTender 7000 for the timing
source.
Note
: Point-to -Point (RVP_Direct) T1’s
DO NOT
provide timing.
Figure 4-3: Clock Source
2.
Go to the
T1/PRI Port
Setup Menu to perform the basic setup for the T1/PRI ports and channels. This
menu is located in the WAN submenu structure, and can be accessed using the following path:
MI Path
Configuration->WAN->T1/PRI_Port(WAN3)->T1/PRI_Port_1
