MB Connect Line mbNET MDH 810, Manual

Page: 56 / 226

Page 56 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Configuring for connection over the Internet (continued)
Router Internet dial-in 12.3.2
In the screen shown above, the router is configured to establish an Internet connection as soon as it is restarted
For other methods of Internet dial-in, please see section Network
– Internet

Transmit IP address:
For the client to be able to access the router, it must
know the router
’s IP address
. Under the configuration
settings made previously, the IP address is sent to the
email address that was provided. This allows you to ac-
cess the router via the IP address.
As the router IP address changes each time it dials in to the Internet, there is an alternative, which is to
use our
DynDNS service . For information on setting up and using the MB Connect Line DynDNS ser-
vice, please see section Network
– DynDNS
Displaying the Internet connection 12.3.3
Assuming that you can access the router, you can see information on the status of the Internet connection by clicking
Sta-
tus
–
Internet .
For more detailed information on status messages, please see section Status Messages