Page 134 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Host Name
Enter the name that you assigned to the industrial router for the DynDNS service.
Interval[s]
This field is for whenever the industrial router name changes, e.g. after a new Internet dial-in.
Enter the time interval after which the industrial router will inform the DynDNS provider of the
new IP address.
17.
Serial interfaces
Note
: The
mbNET
Variant with WLAN has no serial interface.
General
17.1
Both serial interfaces can be accessed via a dial-up or Internet connection using a known IP address.
Serial interface
COM1
can be directly configured to
RS232
,
RS485
and
RS422
using the web interface,
and any associated control commands can be forwarded to the connected controller or device.
Depending on device model,
COM2
is an MPI/PROFIBUS interface on one model, and on other models it
is the same as
COM1
. The MPI/PROFIBUS interface allows remote access to control systems e.g. S7-
300/400, and supports baud rates of up to 12Mbit/s.
Clicking on the
Serial
button will display the following screen:
