Page 156 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Forwarding
18.4
This setting forwards requests from specific IP addresses and ports to defined IP addresses and
ports.
Label
Description
Enable
Check the box by clicking it to enable the subsequent settings after they are saved.
Source IP
You can enter the IP from which data packets are received here. If an entry is made here,
only packets from this one address are forwarded.
Source Port
You can specify the port via which the data packets arrive here. If an entry is made here, only
packets specifically sent via this port are forwarded.
Protocol
The following protocols are available for selection:
All
: The set rule applies to all protocols.
tcp
: The set rule only applies to the TCP protocol.
udp
: The set rule only applies to the UDP protocol.
Destination IP
Enter the IP to which the data packets were originally to be sent here.
Destination
Port
Specify the port via which the data packets are sent to the destination IP here.
Forward IP
Enter the IP to which the data packets are actually to be sent here.
Forward Port
Specify the port via which the data packets are actually forwarded here.
Forward on all
interfaces
The
“FORWARDING” setting is applied to all connections, i.e. even incoming VPN connec-
tions. If this option is not set, the setting only applies to incoming packet from the Internet, but
not a VPN connection via the Internet.
Accepts the new settings and temporarily stores them.
