Page 114 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Network
– Modem
16.3
Notice
: Not valid for
mbNET
variants with WiFi (FW 4.1)
Network
– Modem –Incomming
16.3.1
The industrial router’s integrated modem is for dial-in or Internet connection (analog, ISDN, GSM) where there is no
available DSL or network connection.
NOTE:
If the modem is used for an outgoing Internet connection, it cannot be used for an
incoming connection.
Label
Description
Modem Init
ANALOG:
If using an analog device, enter the command
+GCI=country code
(for coun-
try codes, see
Country codes for analog devices
) here, and in the second row, the
command
X3
(do not wait for dial tone).
ISDN:
If using an ISDN device, you need to enter your MSN number with the command
AT#Z=n
(n= MSN number) If you enter
“n” as “*”, every call will be accepted.
GSM:
if using a GSM device, you must use the preset X3 command. The
+GCI=country
code
may not be used.
