Page 174 of 226
Version: 3.3.5
– DR05 – 23.03.2017
A
“network to network” connection can be created here. Depending on the authentication method, the client re-
ceives an IP address from a defined range or each subscriber specifies its requested address.
Example:
LAN
mbNET Client
mbNET Server LAN
[192.168.99.100]<>ROUTING<>[10.1.0.2] VPN – TUNNEL [10.1.0.1]<>ROUTING<>[192.168.0.100]
If „
Wait for incoming Connection
“ was selected, then this mb
NET
is in Server Mode and is called “
Server
” in
the further documentation, otherwise if
“
Connect immediately
” was selected, then the mb
NET
is in Client
Mode and is called “
Client
”.
Tab
Label
Description
Connection Set-
tings
Active
Check this box to activate the OpenVPN con-
nection.
Connection name
Enter a name for the connection in the input
field.
Connection type
Select the connection type via the drop-down
field.
