MB Connect Line mbNET MDH 810, Manual

Page: 60 / 226

Page 60 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Establishing a connection between client PC and router 12.4.2

Router Internet dial-in . Depending on the router settings (see Internet Configuration), you need to either
restart the router, or push the Reset button.
For further Internet dial-in settings, please see section Network
– Internet

Client PC Internet dial-in. Dial the client PC into the Internet.

Transmit IP address:
For the client to be able to access the router, it must know the
router
’s IP address. The option to transmit the IP address is se-
lected during router configuration. The IP address is identified by
sending it to the email address specified during configuration.
Configuring for connection over the Internet (continued)
As the router IP address changes each time it dials up to the Internet, a helpful alternative is to
use our
DynDNS service .
For information on setting up and using the MB Connect Line DynDNS service,
please see section
Network
– DynDNS
Displaying connection status 12.4.3
Go to
Status
–
Internet to check if there is an internet connec-
tion.
For further information about the status messag-
es, read the chapter:
Status messages