Page 169 of 226
Version: 3.3.5
– DR05 – 23.03.2017
19.3.2.1.1 No authentication or static key
Tab
Label
Description
Network
Settings
Local IP address
Enter the IP address of the local VPN tunnel end point
here, e.g. 10.1.0.5
Peer IP address
Enter the IP address of the peer VPN tunnel end point
here, e.g. 10.1.0.6
Client NAT behind the
local network (The client
will send the IP of the
gateway for traffic
through the local net-
work)
All packets coming into the LAN receive the sender IP ad-
dress of the mbNET. Although this means that it is then no
longer possible to distinguish between senders in the LAN,
the LAN subscribers do NOT have to have the mbNET en-
tered as a gateway.
With authentication without certificates, only one IP channel (local IP address and peer IP address) can be
specified per connection entry.
With manual configuration of the VPN client, the setting
“Local IP address” and “Peer IP
address
” must be reversed accordingly on the client.
