Page 168 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Tab
Label
Description
Connection Set-
tings
Active
Check this box to activate the OpenVPN connection.
Connection name
Enter a name for the connection in the input field.
Connection type
Select the connection type
Client <> Router Connection
via the drop-down field.
Only one
“client to network” connection can be created. Depending on the authentication
method, the client receives an IP address from a defined range or each subscriber specifies
its requested address
.
Example:
Client PC
mbNET
[10.1.0.6] VPN – TUNNEL
[10.1.0.5] <> ROUTING <> LAN [192.168.0.100]
