Page 73 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Label
Description
Enable
To enable the connection, check the box by clicking on it.
Autoconfig
Selecting
“yes” means that the
mbNET
’s local network range and IP address will be used.
By selecting
„no“, you can enter this information manually.
Local IP address or
Range
This is the PPTP server address
Remote IP address or
Range
Enter the address or address range of dial-up clients here.
Give DNS address to
the client
Here, enter the address of the server currently providing name resolution. Usually, you can
enter the PPTP server address here.
Give WINS address to
the client
The WINS server IP address can also be entered here for compatibility with older Microsoft
operating systems.
Encryption
This option selects the type of data encryption.
□
MPPE V2 All
□
MPPE V2 128
□
MPPE V2 40
□
None
You should only select
“none” if it is for test purposes. The data will not be trans-
ferred securely.
Authentication via
PAP, CHAP, MS-CHAP,
MS-CHAP V2
You can select which authentication methods your PPTP server will support here. Place a
check next to your chosen methods and click on Save Changes. Make sure that the client
is also using one of the supported authentication methods, otherwise it will not be able to
connect.
Note that when using MPPE encryption,
You must ALWAYS use MS-CHAP or MS CHAP v2 as the authentication method
.
For more detail on
VPN
–
PPTP
please see section
