MB Connect Line mbNET MDH 810 Manual Download Page 109

Page: 109 / 226

Page 109 of 226

Version: 3.3.5

– DR05 – 23.03.2017

System

– Firmware

15.7

There are two ways to update the industrial router

’s firmware, both are described on the following

page.

Upgrade via USB

15.7.1

This requires a USB storage device to be connected to the industrial router so that the file can be
transferred across. The firmware name (

image.bis

) is listed here. To upgrade the firmware, click

Start

. Then restart the device.

Use the

image.bis

data.

ATTENTION!

Never interrupt the firmware update as the device can not start any more!

The update process can take up to 10 minutes.

Summary of Contents for mbNET MDH 810



































































































































































































































Search results

Summary of Contents for mbNET MDH 810

Reviews:

Related manuals for mbNET MDH 810

Brands by name

Popular brands

MB Connect Line mbNET MDH 810, Manual

Search results

Summary of Contents for mbNET MDH 810

Reviews:

Related manuals for mbNET MDH 810

Brands by name

Popular brands