Page 104 of 226
Version: 3.3.5
– DR05 – 23.03.2017
System - USB
15.4
You can connect a USB device (flash or external drive) to the industrial router
’s USB port and make this
available to network users as an additional drive.
To set up the USB port, select
System
on the navigation bar on the left and
USB
on the navigation bar at
the top. This will display the screen shown below.
Please note that the drive must have a FAT/FAT32 file system. Other file systems, e.g. NFTS, can cause prob-
lems.
Label
Description
Enable
Select whether to enable connection of a USB device with the industrial router.
Workgroup-
name
Enter the name of the workgroup through which users can access the drive.
Servername
Enter a name under which the USB drive will appear in the above mentioned workgroup.
Allow only to
read from USB
device
Select whether users will have read-only access to the USB drive, or can also save data to it.
Share data to
public
Specify whether to give access rights to network users who are not registered under the in-
dustrial router
’s user management system.
USB devices
The bottom area of the screenshot shows whether a USB is connected. A connected USB
device is indicated by a green dot.
