Page 215 of 226
Version: 3.3.5
– DR05 – 23.03.2017
Toolbox
23.2
Label
Description
Toolbox active
If this checkbox is active, then the toolbox is going to be executed after
every router restart.
Status Symbol
The Status Symbol shows if the toolbox is executed or not. By using the
button start/stop you can control the toolbox manually.
Toolbox load from...
You can only load the toolbox from an USB-Storage at the moment.
USB Configuration
The newest toolbox version is displayed here.
Webserver
Configuration
The toolbox is executed on a separate webserver on the router. The de-
fault port for the webserver is 80. But this port is already occupied by the
webinterface of the router. The default value for the toolbox webserver is
port 81. You can access the webserver with
You can adjust the default webserver port of the router
System
->
Web
-> HTTP-Port
(e.g. 8080) Now you can set the port of the toolboxwebserver to port 80,
then you can access the toolbox with:
Note
:
It is not necessary to write the portnumber behind the URL if you
use Port 80! (This is only true for port 80!)
Store on USB fold-
er…
The toolbox also saves his configuration on the USB-Storage. But first
you have to choice a name for the folder where the files are going to be
saved. The files can easily be duplicated to another device at this way.
