Malaguti X3M, User Manual

Page: 132 / 292

14
5
2
3
4
1
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONING
ENGLISH
C) STAND-BY (sub-menu)
When this image appears on the display,
you can switch the sub-menu display format
(graphical bar) from V-batt to RPM and vice
versa by pressing the
MODE within 3
seconds. If this command is not given within
3 seconds, the instrument board switches
to the 0-40 function.
D) 0-40 FUNCTION
It shows acceleration from 0 to 40 km/h.
This function is automatically reset after 15
seconds. The function can be called up
again by starting the vehicle
.
E) TIME FUNCTION
It shows the current time. To set the time,
hold the
MODE button down until the sub-
menu (graphical bar) disappears, then
press the
MODE button again to actually
change the time setting. Short presses of
the button result in slow changes. Hold the
button down for more than 10” to allow for fast adjustment. To
return to the normal display, do not press
MODE for at least 3”. If
power is disconnected, this function will be automatically reset.
The setting operation must be thus repeated. This operation must
be performed with the vehicle at a standstill.
MAIN MENU FUNCTIONS
A) TOD FUNCTION
This indicates the total distance travelled;
this value is never reset and remains even
after the vehicle is turned off (the total
distance travelled will be stored for 10 years
from the last time the vehicle was used).
B) RPM FUNCTION
This indicates the vehicle’s engine speed
in revolutions per minute. This value is also
represented in graphical format by means
of a graphical bar (see Sub-menu
Functions).
00001
TOD (total)
switch sub-menu display
(bar graph) from Vbatt to
RPM and vice versa
1"
1" 1" 1"
hold
down
for 3"
Do not
press
for 4"
1"
Switch from Mp/h - Km/h
4"
2" 2"
Set time
4"
A B C D
00 - - - - -
STAND-BY
0 40
Acceleration
E
18-45
TIME
TIME (Time)
000.0
TD
TD (partial)
1" 1" 1" 1" 1"
H G
AVE
0.0
AVE (average)
Stop
Reset Reset
Reset / Start
F
LAP
00'00"
LAP (chronometer)
(revolution
counter)