Malaguti X3M, User Manual, Page: 133 / 292

15
5
2
3
4
1
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONING
ENGLISH
FUNCTIONS OF THE GRAPHICAL BAR
To select one of the graphical bar functions,
open the main STAND-BY menu. When “- -
- - -“ appears on the display, press the
MODE
button within 3”. The graphical bar will switch
from displaying engine speed (RPM) to
battery charge level (V-batt) and vice versa.
The function is stored after 3 seconds.
BATTERY CHARGE LEVEL
This check should be made with the engine
off; if battery power drops to MIN., the symbol
will flicker, irrespective of the function
displayed.
When the battery charge level drops to its
minimum threshold, the battery level
function is automatically activated, irrespective of the function
selected, and the last dash of the graphical bar will flash. If you
change function, the battery logo will remain displayed until the
correct power supply is resumed.
When the battery warning light comes on, recharge the
battery as soon as you can!
RPM - ENGINE SPEED
This function shows engine speed in graph-
ic format. The numeric value can be dis-
played with the RPM function (revolution
counter) of the Main Menu.
F) LAP FUNCTION
T his is the chronometer. Press the MODE
button once to START the chronometer (all
previous data are reset); press again to
STOP . To use this function, press the MODE
button until you relocate the LAP function.
Values are given in MIN and SEC .
G) AVE FUNCTION
This indicates the average speed in km/h.
The calculation does not include stops
(speed = 0). To reset, hold the
MODE button
down when the vehicle is at a standstill until
a ‘0’ appears on the display.
H) TD FUNCTION
This indicates the partial distance. To reset,
hold the
MODE button down with the vehicle
is at a standstill.
SUB-MENU FUNCTIONS