Malaguti centro 160 ie, User Manual

Page: 133 / 242

1
2
3
4
6
5
35
Fig.32
R
ENG
ATTENTION: adjust both shock absorbers
according to the same adjustment index. An
unbalanced adjustment may compromise the
vehicle’s stability.
While riding with a passenger, preload the shock
absorber spring at position ‘4’.
When adjusting, wear gloves to protect yourself
against scratching.
5.10 ADJUSTING ENGINE IDLING SPEED
For possible adjustments, please contact an
Authorised MALAGUTI Service Centre.
5.11 THROTTLE FREE PLAY ADJUSTMENT
Check that the throttle grip idle stroke is 1-3 mm
(measured on the end of the throttle grip).
Any adjustments must be entrusted to an
Authorised MALAGUTI Service Centre.
5.9 ADJUSTING REAR SHOCK ABSORBERS
• The shock absorbers are equipped with a spring
preload ring nut, with which it is possible to adjust the
vehicle’s behaviour depending on the load carried,
how the vehicle is driven and where.
• The adjustment is carried out using the wrench
supplied, by acting on the ring nut located in the
top section of the shock absorbers ( R-Fig.32 ); turn
anti clockwise to increase spring pre-load (load
increase).
7KHUH DUH ÀYH DGMXVWPHQW SRVLWLRQV
1) light-weight driver only (up to 75 kg)
2) driver only
3) driver and luggage case
4) driver and passenger
5) driver, passenger and luggage case