Malaguti centro 160 ie, User Manual

Page: 128 / 242

2
3
4
6
1
5
30
Fig.26 Fig.27
3
1
2
A
F
S
ENG
Topping up
Before topping up, check the oil level and in no case
allow the level to rise above the MAX notch.
Never allow the level to rise above the MAX
mark! Excessive internal pressure can impair
performance and cause malfunctioning or
damage to the engine.
Waste oil is toxic for the environment, therefore
we suggest you contact an Authorised MALAGUTI
Service Centre for disposal according to the rules
in force.
&KDQJH HQJLQH RLO DQG FOHDQ WKH ÀOWHULQJ QHW
DIWHU WKH ÀUVW NP PL
and every 4000 km (2496 mi)
1) Warm the engine up for a few minutes.
2) Stop the engine. Put an oil container under the
engine and remove the dipstick ( A-Fig.26 ).
3) Remove drainage cap ( S-Fig.26 DQG OHW RLO ÁRZ
out.
5HPRYH ÀOWHU FDS F-Fig.26 ).
&OHDQ WKH RLO ÀOWHULQJ QHW 1-Fig.27 ) with solvent.
6) Check the O-ring ( 3-Fig.27 ) and replace if
damaged.
5HÀW 2ULQJ FRPSUHVVLRQ VSULQJ 2-Fig.27 RLO ÀOWHULQJ
QHW DQG WLJKWHQ ÀOWHU FDS
Make sure the O-ring is correctly seated.
5HÀW GUDLQDJH FDS DQG ZUHQFK
9) Fill the engine with 800cc. of Q8 CLASS 10W40 oil and
UHÀW WKH GLSVWLFN
10)Run the engine and let it warm up; check for any
leaks. If leaks are noted, stop the engine and locate
their cause.
11)Repeat engine oil level check ( see “Checking the oil
level” chap.5.4 ).
/HWWLQJ WKH HQJLQH UXQ ZLWK DQ LQVXIÀFLHQW DPRXQW
of lubricant or with the wrong types of lubricant
causes wear to moving parts and can in the long
run cause serious damage.
Waste oil contains polluting substances. Have oil
replaced by an Authorised MALAGUTI Service
Centre that will also dispose of waste oil in
accordance to the law.