Maguire Products WEIGH SCALE BLENDER WSBMB Series, Installation Operation & Maintenance

Page: 50 / 148

M A G U I R E P R O D U C T S , I N C .
50
W E I G H S C A L E B L E N D E R

Controller Keypad
– Summary Description
Detailed explanations are given on the pages that follow.
AUTOMATIC OPERATION MODE : (normal operation on power up)
VIEW View Data: date, time, cycles, and each component weight.
Press VIEW, to print data.
RCP Enter and retrieve stored RECIPES.
BTCH View BATCH data: Target Weight, Current Portion, and
Accumulated Total, and Batch Count. CE = clear displayed field.
FAST Run rapid FAST cycles after a normal weighed cycle.
TAG Tag Work Order and Operator numbers to all reports.
EXIT Press to EXIT all sequences from ALL MODES.
SET Press to review or change settings.
CE Press to display "raw signal" weight readout for 3 seconds.
MANUAL OR PROGRAM MODE
: Press: ; then (11111) or your own 5 digit password.
OPER Operate all devices manually; open and close valves.
TIME Operate devices for a selected time period.
CAL Operate devices to learn rate.
Above keys use 1 through 9, A, B, C, DUMP, MIX, HOLD, ALARM.
ZERO Zero the tare weight with the bin empty.
FULL Using known weights, enter gram weight to calibrate load cells.
00 Clear DATA fields.
99 Set flag to enable weight calibration of load cells.
PROGRAM MODE ONLY : Press: ; then (22222) or your own password.
SET Enter settings if access in Automatic mode has been locked out.
PARA View or change system parameters.
Press PARA for next in list, "*" for previous, SET for next table, VIEW for previous table.
STAR FUNCTIONS: Press and two numbers for the following functions:
02 Extrusion and Yield Control. 67 Modbus Enable / Disable.
03 3-digit (xx.x) or 4-digit (xx.xx) settings. 71 Color percent of blend.
04 Simulate FOUR software. 72 Additive percent of blend.
05 Inhibit totals clearing. 74 Stop, alarm MAX wt exceeded.
08 Blend Mode: % Total or % Natural. 75 Alarm on weight drop.
11 Date and Time adjustment. 77 Print parameters.
12 Move table from ROM to RAM. 78 Change program mode PASSWORD.
14 Set Material Types 82 Precision Ratioing.
18 Language Selection 83 Progressive Metering
22 LIW Model Selection 86 Backdoor Password
23 Move from RAM to EEPROM. 87 VOLUMETRIC operation.
25 ROM OK flag, "CE" to clear. 88 Print display readout.
32 Move from EEPROM to RAM. 89 Select pounds, kilos.
44 End cycle - bin full. 93 Update WSB software from USB drive
45 Change MANUAL mode password. 94 Update WSB Net software from USB drive
47 Totalizer flag. 95 Select COM port Baud Rate
48 Dispense range xx.x to xxx. 97 USBC Driver version display, update, verify
52 Double dump weigh bin. 98 Display raw weight number.
54 Print cycle information. 99 Enables Weight Calibration of the Load Cells
57 Alternate Liquid Color 00 Clear All Data Fields.
66 WSB I.D. number (1-255).