Maguire Products WEIGH SCALE BLENDER WSBMB Series, Installation Operation & Maintenance

Page: 115 / 148

M A G U I R E P R O D U C T S , I N C .
115
W E I G H S C A L E B L E N D E R

Clear Routine
The “
CLEAR
” routine will copy “
User Backup Settings
” into “
User Settings
”. If “User Backup Settings” were
not intentionally saved earlier (using 23 ), then the CLEAR routine is essentially restoring Factory Default
Settings. The Clear routine is the same as using the 32 function. All rate calibration numbers that the unit
has "learned" at the time of the 23 will be restored back into RAM.
To execute a "CLEAR", hold down the "CE" key while turning POWER ON. HOLD the CE key until you see
RESET on the display, then relea
se the “CE” key. When done correctly, the display will say :
CLEAR
Retrieve Parameters (CLEAR) from EEPROM - Keypad Sequence:
Switch Power Off to the Controller
Hold Hold the
“CE” Key down
Switch Power on to the Controller
Hold the CE key until you see RESET, then
Release
The “CE” Key
Display will say ( CLEAR )
If you do not see ( CLEAR ) on the display, do it again.
CLEAR does not clear EEPROM information but instead loads EEPROM into RAM. Load Cell weight calibration numbers are NOT
lost. (To load EEPROM with correct RAM information, see KEYPAD, *23)