Maguire Products WEIGH SCALE BLENDER WSBMB Series, Installation Operation & Maintenance

Page: 36 / 148

M A G U I R E P R O D U C T S , I N C .
36
W E I G H S C A L E B L E N D E R

Normal Operation and Saving the Configuration
1.
Fill HOPPERS.
2.
Turn POWER ON. Verify correct settings.
3.
On Controller, set STOP and PAUSE switches UP. Turn MIXER motor switch DOWN to run for a
timed period.
Unit will now operate automatically to maintain a level of material high enough to cover the sensor.
Use the STOP or PAUSE switches to stop the blender.
Turn POWER off only on final shutdown.
After several days of proper operation:
Save all parameter information to the User Backup Settings for future retrieval just in case software
problems develop later.
To SAVE all parameter information to the User Backup Settings:
Save Parameters Keypad Sequence:
Press Display will say: ENTER PASSWORD
Press Display will say: PROGRAM
Press Display will say: INSTRUCTION [ __ ]
Press Display will say: SAVE USER SETTINGS
Wait: when done, Display will say: PROGRAM
Press Display will say: WAITING
If software related problems develop later, RETRIEVE this correct copy of the parameters from the User
Backup Settings. This clears corrupted data from RAM and corrects most software problems.
To Retrieve:
Retrieve Parameters (CLEAR) from User Backup Settings - Keypad Sequence:
Switch Power Off to the Controller
Hold
Hold the “CE” Key down
Switch Power on to the Controller
Release
The “CE” Key
Display will say ***
CLEAR ***
If you do not see
CLEAR on the display, do it again.