Macherey-Nagel URYXXON 500, User Manual

Page: 21 / 133

Instruction for use URYXXON
®
500
21 Instruction for use URYXXON ® 500 V 2.1 / 01.23
Press to confirm and save your changes. If you leave the
menu by pressing , none of your changes will be adopted.
If the autostart function is active, the device automatically
recognizes a strip that is placed on the transport tray and starts the
measurement. If the autostart function is inactive, you will find the
new activity‑button in the upper right corner of the start screen.
In this case, the instrument only starts a measurement if you press
the activity‑button
Start
.
Insert strip
ID
Seq.No.
Clarity
Color
Next sample Worklist
Edit Emergency Options
Edit
selected
Menu Start
0001
9. Enter sediment
The Enter sediment menu only shows urine chemistry results for
which an additional entry of sediment findings is necessary. You
can determine freely, which results need to receive additional
sediment findings as well as the actual sediment parameters (see
chapter 8.4 Sediment options, page 17) .
NOTICE
To add sediment parameters, you have to activate the Enter
sediment function and define sediment parameters first.
Menu
Settings
Enter sediment
Memory
Check mode
Press the activity‑field
Enter
sediment
. A new screen appears which shows
the results of samples that still need additional sediment findings.
You can set the filter for these results under sediment settings (see
chapter 8.4 Sediment options, page 17). Multiple options for the
samples are available.
Enter sediment
Seq.No.: 0001
ID: 5552491
2009.12.11 16:13
* BLD 250 Ery/µl
* UBG 2 mg/dl
* BIL 2 mg/dl
* PRO 500 mg/dl
* NIT POS
* KET 25 mg/dl
* GLU >=500 mg/dl
pH 8
SG 1.010
* LEU 500 Leu/µl
1/7
NOTICE
The sediment filter only filters results that were measured after
the filter has been set and activated. Already existing results will
not be filtered afterwards
9.1 Microscope
To enter sediment findings for the displayed result, press the activity
button . A new screen appears, in which you can choose from
a list of sediment parameters on the left side of the screen (see
chapter 8.4 Sediment options, page 17) .
Enter sediment
Select Clear
LEUKOS
RBCs
Choose your desired sediment parameter with the scroll‑arrows
and confirm your selection with the activity‑button
.
Alternatively, you can directly press the sediment parameter.