Instruction for use URYXXON
®
500
13
Instruction for use URYXXON
®
500 V 2.1 / 01.23
On
Off
4.6 Calibration
The instrument performs an automatic, internal calibration before
each measurement.
4.7 Switching off the device
Always switch off the device after use by pressing the on / off
switch
E
. If you do not use the device for a longer period of time,
disconnect the device from the power outlet.
5. Quick start
NOTICE
The instrument features multiple different settings, options
and functions. We recommend to read the instruction for use
carefully and to make individual adjustments to ensure the
instrument functions at its best.
NOTICE
Only use consumables within their expiration date.
Directly after turning on the instrument, it is ready and can perform
measurements. In order to start a measurement, dip a test strip
with all test pads into a urine sample. Draw the long edge of the
strip along the rim of the sample container and press the same
edge briefly to an absorbent towel.
Dip test strip
Remove excess urine
Place the urine test strip straight on the transport table under the
strip detector (a) as shown in the figure. The measurement starts
automatically as soon as the detector has recognized the strip. To
do this, push the strip up to the front edge of the transport table.
To enter additional information for the sample, choose the activity‑
button
Edit
before placing the strip on the tray. A menu appears
in which you can enter the patient ID, sequence no., as well as
pre‑defined values for clarity and color.
The result is automatically printed and saved after the measurement.
E
E
