Section
Summary of Change
Internal Use Only
Installing Cutterbar Spindle Shear Pin, page
143
Revised procedure.
Service Dept
Changing R216 SP Cutterbar Crop Stream
Configuration, page 147
•
Revised note re disc timing tool
—
it is
included with the header.
•
Added location of tool on the header.
Service Dept
4.9.2 Removing Cutterbar Curtain, page 156
Revised illustration.
Tech Pubs
4.9.2 Removing Cutterbar Curtain, page 156
Revised Step 1.
Service Dept.
4.9.3 Installing Cutterbar Curtain, page 157
Added step.
Service Dept.
4.10.1 Inspecting Conditioner, page 158
Changed illustrations to show three
feedroll belts.
ECN 58581
4.12.3 Replacing Header Disc Speed Sensor,
page 169
Revised Step 6.
Service Dept.
Added topic.
Tech Pubs
Added topic.
Tech Pubs
Added topic.
Tech Pubs
5.5 Adjustable Gauge Roller Kit
Added information.
Service Dept
5.6 Polyurethane Intermeshing Roller
Added topic.
ECN 58790
Added topic.
Tech Pubs
Added information.
Service Dept
Replaced MD #B6667 with MD #B6848.
ECN 58703
6.2 Mechanical Problems, page 184
Removed the symptom: Header slows when
going uphill
Engineering
Removed the following topics:
•
Changing the Conditioner
•
Removing the Conditioner
•
Installing the Conditioner
Service Dept. and
Engineering
Recommended Lubricants, inside back cover
Revised header drive gearbox oil capacity.
Engineering
215026
iv
Revision A