215026
31
Revision A
1030607
A
A
B
C
D
E
Figure 3.27: Hydraulic Fittings
7.
Connect hydraulic fittings to the hydraulic hoses as follows:
a.
Attach 90° elbow fitting (A) and 1 in. female coupler
fitting (B) to disc pressure hose (C).
b.
Attach 90° elbow fitting (A) and 1 in. male coupler
fitting (D) to disc return hose (E).
1030596
A
B
C
D
E
F
Figure 3.28: Hydraulics and Electrical
–
Draper Ready
8.
Connect the hydraulic hoses to the windrower with quick
coupler fittings as follows:
a.
Connect disc pressure hose (A) with coupler (B) and
torque to 205
–
226 Nm (151
–
167 lbf·ft).
b.
Connect disc return hose (C) with coupler (D) and
torque to 205
–
226 Nm (151
–
167 lbf·ft).
c.
Connect case drain hose (E) to fitting (F), with relief
valve pointing towards the ground.
NOTE:
If required, loosen fitting (F) and retighten as needed to
ensure relief valve is pointing straight down as shown.
9.
To connect electrical harness, refer to Steps
to
