![background image](http://html1.mh-extra.com/html/macdon/r216/r216_operators-manual_3439773179.webp)
215026
167
Revision A
1028552
A
B
C
Figure 4.191: Retaining Pins and Hardware on
Driveshield
2.
Secure the top of the outboard half of the driveshield with
two washers (A), retaining pin (B), bolt (C), and a hex flange
center lock nut.
3.
Secure the front and rear of the inboard half of the
driveshield with retaining pin (B), bolt (C), and a hex flange
center lock nut.
NOTE:
The inboard half of the driveshield does
NOT
use
washers (A).
1028426
Figure 4.192: Left Driveshield
4.
Close the driveshields. For instructions, refer to
.