215026
28
Revision A
1023024
A
B
Figure 3.20: Header Support
18. Install clevis pin (A) through support and windrower lift arm
and secure with hairpin (B). Repeat for the opposite side of
the header.
IMPORTANT:
Ensure clevis pin (A) is fully inserted, and hairpin is installed
behind bracket.
1029799
A
Figure 3.21: Safety Prop Lever
19. Disengage the safety props on both lift cylinders as follows:
NOTE:
If the safety prop will not disengage, raise the header to
release the prop.
a.
Turn lever (A) away from the header to raise the safety
prop until the lever locks into the vertical position.
b.
Repeat for the opposite cylinder.
1014802
A
Figure 3.22: GSL
20. Start the engine and press HEADER DOWN switch (A) on
GSL to fully lower header.
NOTE:
If not prompted by the HPT display to restore float, restore
float manually.
21. Shut down the engine, and remove the key from
the ignition.