215026
153
Revision A
1028481
A
Figure 4.163: Header Drive Gearbox Location
6.
Locate gearbox (A) on the left side of the header.
1028472
A
B
Figure 4.164: Header Drive Gearbox
7.
Clean the area around check plug (A).
8.
Remove check plug (A) with an 13 mm (1/2 in.) socket.
9.
Ensure the lubricant is even with the bottom of the check
hole (with check plug [A] removed) or slightly runs out of
the check hole.
10. If necessary, remove fill plug (B) and add lubricant to the
gearbox through the fill hole until lubricant runs out of the
check hole (with check plug [A] removed). Refer to the
inside back cover of this manual for a list of recommended
fluids, lubricants, and capacities for the machine.
11. Reinstall the plug(s) and torque to 23 Nm (17 lbf·ft).
12. Close the left driveshield.
13. Lower the header fully.
14. Shut down the engine, and remove the key from the
ignition.