215026
163
Revision A
Installing Conditioner Drive Belt
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Lower the header fully.
2.
Shut down the engine, and remove the key from the ignition.
1028480
A
Figure 4.182: Left Driveshield
3.
Open left driveshield (A). For instructions, refer to
1028349
A
B
C
Figure 4.183: Conditioner Drive
4.
Install drive belt (A) onto driven pulley (C) first, and then
onto drive pulley (B), ensuring that the belt is in the
pulley grooves.
NOTE:
If necessary, loosen the jam nut and adjuster nut to relieve
the spring tension.
