215026
36
Revision A
3.4
Detaching Header from Windrower
3.4.1
Detaching R216 Rotary Disc Header from M1240 Windrower
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
CAUTION
Check to be sure all bystanders have cleared the area.
1030975
A
Figure 3.37: GSL
1.
Start the engine, and press switch (A) to lower the header
to the ground.
2.
Shut down the engine, and remove the key from
the ignition.
3.
Open the left platform. For instructions, refer to the
windrower operator
’
s manual.
1030628
A
B
C
Figure 3.38: Header Drive Hydraulics
4.
Disconnect hydraulic hoses (A), (B), and (C) from the
windrower.
5.
Install caps and plugs on open lines to prevent buildup of
dirt and debris while in storage.